smartrack enclosure filter kit model number: SRFILTER description the SRFILTER comes prefabricated and ready to install in standard 48u rack enclosures on the inside of the door. vertical velcro strips will need to be trimmed accordingly to accomodate 45u, 42u and 25u enclosures. when a filter becomes dirty or worn from use, be sure to replace. velcro pieces can remain attached to the door, with no need for replacement. features prevents dust and particle buildup on equipment installed in standard smartrack enclosure facilitates hot-aisle / cold-aisle data center configurations comes ready to install in our standard 48u racks vertical velcro strips must be trimmed accordingly to accomodate 45u, 42u and 25u enclosures specifications physical unit dimensions (hwd / in.) 6.5 x 20 x 6.5 unit dimensions (hwd / cm) 16.51 x 50.8 x 16.51 unit weight (lbs.) 2 unit weight (kg) 0.91 warranty highlights prevents dust and particle buildup on equipment installed in standard smartrack enclosure facilitates hot-aisle / cold-aisle data center configurations fully compatible with 25u, 42u, 45u and 48u smartrack enclosures system requirements standard 25u-48u tripp lite rack enclosures package includes 20" (l) x 1.5" (w) horizontal velcro strips (3 pieces) 40" (l) x 1.5" (w) vertical velcro strips (4 pieces) 7/8" diameter circular velcro pieces (12 pieces) filter (1 piece) 1 / 2
product warranty period (worldwide) not applicable ? 2015 tripp lite. all rights reserved. all product and company names are trademarks or registered trademarks of their respective holders. use of them does not imply any affiliation with or endorsement by them. tripp lite has a policy of continuous improvement. specifications are subject to change without notice. tripp lite uses primary and third-party agencies to test its products for compliance with standards. see a list of tripp lite's testing agencies: http://www.tripplite.com/products/product-certification-agencies 2 / 2
|
